Kobelco Alternative Pressure Sensor M515X-C1964E-016BG

Kobelco Alternative M515X-C1964E-016BG Pressure Sensor

How to debug the pressure switch of air compressor?

Pressure high and low adjustment.Adjust screw 2 clockwise with pressure to increase the pressure.On the contrary, the low operating pressure means that the pressure difference remains the same.

Adjust screw 1 clockwise with pressure so that it will rise under its action.On the contrary, a decrease in the acting pressure means that its pressure does not change.

When the air compressor sets the pressure or runs, it indicates that the vent valve and saturation will discharge the gas in the steel pipe. Of course, this is a normal phenomenon, and you need not worry about it.

When adjusting the pressure, do not exceed the pressure range of the compressor, but proper exhaust is necessary.

LF15 series pressure switches are used to regulate the pressure in the air compressor tank to operate between two preset pressure values.A pressure switch with a relief valve prevents the air compressor from being overloaded and an additional handle can be used to manually cut off the compressor's power.The four-way base interface makes the installation of safety valves and pressure gauges easier.