Qingdao Futai, Air Compressor Filter Manufacturer in China.
Maintenance & Maintenance of Air Filter
The air filter is a component that filters out air dust and dirt. The filtered clean air enters the compression chamber of the screw rotor for compression.Because the internal clearance of the screw machine only allows particles within 15u to filter out, if the air filter element is blocked and damaged, a large amount of particles larger than 15u will enter the screw machine to circulate, which will not only greatly shorten the service life of the oil filter element and the oil separator, but also cause a large amount of particles to directly enter the bearing Cavity, accelerating the wear of the bearing, increases the rotor gap, reduces the compression efficiency, and even the rotor is boring and seized.Then, it is necessary to have specialized personnel to maintain the intake air filter element regularly and regularly.
Note: When cleaning or replacing the air filter element, the parts must be checked one by one to prevent foreign matter from falling into the intake valve.Normally, check whether the air intake expansion tube is damaged or flattened, and whether the connection between the expansion tube and the air filter inlet valve is loose or leaking. If it is found, it should be repaired and replaced in time.
Contact Person: Miss. Sophia