Manufacturer Alternative Atlas Copco Screw Compressor Air Oil Separator

Manufacturer Replace Atlas Copco Screw Compressor Air Oil Separator

Failures and treatment methods of the air-oil separator of the air compressor:

• The exhaust temperature is too high.

Possible cause/removal method, the oil level in the air oil separator is too low/check the oil level, add oil if necessary

• Exhaust pressure is too high (Oil separator tank pressure)

Possible cause/elimination method: blockage of the air oil separator/replace the air oil separator;

• The air supply pressure is lower than the rated exhaust pressure

Possible cause/elimination method: The filter element of the air oil separator is blocked/check and replace

• Excessive oil consumption

Possible cause/removal method: The filter element or gasket of the air oil separator is damaged. Check whether the filter element and gasket are damaged and must be replaced.

Features

1. Low pressure drop and energy saving

2. High quality filtration media
3. Low oil consumption
4. Reliable and stable
5. Compact design
6. Long life span

Notes for air oil separator:

• The air oil separator can only be replaced, not cleaned;
• Do not connect the filter with a flange.
• The oil return pipe must be inserted into the bottom of the filter to avoid affecting the oil return.

AIR OIL SEPARATOR — SEPARATES THE OIL FROM THE COMPRESSED AIR