Qingdao Futai, Air Compressor Filter Manufacturer in China.
 |
| Place of Origin: | CHINA |
| Brand Name: | QINGDAO FUTAI |
| Certification: | ISO 9001:2015 |
| Model Number: | Roto Z Fluid 2908850101 |
| Packaging Details: | Carton, Wooden cases, Plastic bag, etc, make the package as your requirement. |
|---|
| Product Name: | Air Compressor Lubricating Oil | Part Number: | Mineral Lubricant |
|---|---|---|---|
| Application: | Air Compressor | Oil Type: | Mineral Based Oil With Tailored Additive Pack |
| Service Intervals: | 4000 Hours | Appearance: | Light Brown |
| Environment: | Ambient Temperature Range At 0°C To 50°C | MOQ: | 18 L |
| High Light: | FUTAI 18L Air Compressor Lubricating Oil,2908850101 mineral lubricant screw type compressor oil,2908850101 OEM Jaguar Air Compressor Lubricating Oil |
||
Jaguar Mineral Lubricant Air Compressor Lubricating Oil
Compressors increase the pressure of air or any gaseous medium. Compressor oil is the most important lubricant for lubricating the main parts of the machine series under more or less service conditions.
Traditional lubricated compressors offer the same level of filtration as oil-free compressors and, with the right systems in place, can meet air quality regulations across industries. As an added benefit, the up-front cost of a lubricated air compressor is between 45 and 50% lower than that of a comparable oil-free model. Traditional lubricated compressors also come with lower lifelong operational costs and enjoy greater durability, and low environmental impact thanks to filtration systems that mitigate condensate discharge.
| Performance | Method | Unit | Value | ||
|---|---|---|---|---|---|
| Viscosity at 40°C | ASTM D 445 | mm²/s | 46 | ||
| Viscosity index | ASTM D 2270 | ≥90 | |||
| Foam stability | ASTM D 892 | ml/ml | 30/0 | ||
| Total acid number | ASTM D 974 | mg KOH/g | 0.1 | ||
| Rust test | ASTM D 665B | Pass | |||
| Pour point | ASTM D 97 | ℃ | -35 | ||
Suggestion: The machine with power below 55KW can use this product
In general, the air compressor lubricants should have the following characteristics:
Proper lubrication can minimize friction. Since friction produces more heat and requires more energy to cool the equipment sufficiently to operate safely, less friction means less energy consumption and lower energy costs.
Contact Person: Sophia Song
Tel: +8618562870893
