Qingdao Futai, Air Compressor Filter Manufacturer in China.
|Place of Origin:||CHINA|
|Brand Name:||QINGDAO FUTAI|
|Application:||Ingersoll Rand Screw Air Compressor||Type:||Valve|
|Max Design Temp:||120°C||Min Design Temp:||-10°C|
|Test Pressure:||21bar||Place Of Origin:||China|
Ingersoll Rand Replacement 22205462 Air Compressor Valves
Solenoid valve is an industrial equipment that uses electromagnetic control. It is a component used to control fluid automation and belongs to the actuator; it is not limited to hydraulics and pneumatics. The application in our daily life is very extensive. First of all, we have a preliminary understanding of the solenoid valve. The solenoid valve is composed of a magnetic coil and a magnetic core, and is a valve body containing one or several holes. When the coil is energized or de-energized, the operation of the magnetic core will cause the fluid to pass through the valve body or be cut off to achieve the purpose of changing the direction of the fluid.
The solenoid valve is divided into six sub-categories from the difference in valve structure and material and principle: direct-acting diaphragm structure, step-by-step direct-acting diaphragm structure, pilot diaphragm structure, direct-acting piston structure, Step-by-step direct-acting piston structure, pilot piston structure.
Solenoid valves are classified according to their functions: water solenoid valves, steam solenoid valves, refrigeration solenoid valves, cryogenic solenoid valves, gas solenoid valves, fire solenoid valves, ammonia solenoid valves, gas solenoid valves, liquid solenoid valves, micro solenoid valves, Pulse solenoid valve, hydraulic solenoid valve normally open solenoid valve, oil solenoid valve, DC solenoid valve, high pressure solenoid valve, explosion-proof solenoid valve, etc.
There is a closed cavity in the solenoid valve with through holes at different positions. Each hole is connected to a different oil pipe. In the middle of the cavity is a piston. There are two electromagnets on both sides. Which side of the magnet coil will be attracted to the valve body when it is energized. On the other hand, by controlling the movement of the valve body to open or close the different oil discharge holes, and the oil inlet is normally open, the hydraulic oil will enter the different oil discharge pipes, and then the piston of the cylinder is pushed by the oil pressure. Drive the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.
Drain Valve PN:
If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.
Contact Person: Wu