Qingdao Futai, Air Compressor Filter Manufacturer in China.
 |
| Place of Origin: | CHINA |
| Brand Name: | QINGDAO FUTAI |
| Certification: | ISO 9001:2015 |
| Model Number: | 91111-003 /2116010028 |
| Type: | Oil Separator | Material: | Fiberglass |
|---|---|---|---|
| Product Name: | Air Oil Separator | Place Of Origin: | China |
| Application: | For Fusheng Air Compressor | Filtration Accuracy: | 0.1μm |
| Part Number: | 91111-003 /2116010028 | Residual Oil Rate: | ≤ 3 Ppm |
| High Light: | 91111003 Air Oil Separator,2116010028,3ppm Screw Compressor Air Filter |
||
Fusheng Screw Compressor Air Oil Separator 91111003 2116010028
91111-003 Introduction of Fusheng Air Compressor Oil Separation Products:
91111-003 The oil content of Fusheng air compressor is the key component to determine the quality of compressed air discharged from oil injection screw compressor. Under the correct installation and use and good maintenance, it can ensure the quality of compressed air and the service life of air compressor filter element. It is mainly installed on the air compressor, used to purify the compressed air from the air compressor, so that the size of the oil droplets and gas in the compressed air are separated and coalesced, so as to achieve the purification effect of air and effectively prolong the service life of each component.
| Model | flange outer diameter(mm) | Bottom outer diameter(mm) | Height(mm) | Suitable for |
| 10HP | 115 | 90 | 135 | 7.5KW/10HP |
| 15-20HP | 170 | 130 | 160 | 11-15KW/15-20HP |
| DB2074 | 170 | 130 | 200 | 22KW/30HP |
| 40HP | 170 | 130 | 230 | 22KW/30HP |
| DB2186 | 200 | 165 | 230 | 37KW/50HP |
| DB2132 | 200 | 165 | 305 | 55KW/75HP |
| 91111-003 | 355 | 300 | 305 | 75KW/100HP |
| 91111-001 | 355 | 300 | 400 | 132kw/150HP |
| 91111-007 | 355 | 300 | 500 | |
| 91111-008 | 355 | 300 | 600 |
The correct way to replace the oil and gas separator:
1. Stop the air compressor, close the air pressure outlet, open the drain valve, and confirm that the system has no pressure.
2. Disassemble the pipeline above the oil and gas barrel, and remove the pipeline from the outlet of the pressure maintenance valve to the cooler.
3. Remove the return oil pipe.
4. Remove the fixing bolt on the cover of the oil and gas barrel, and remove the upper cover of the barrel.
5. Remove the oil and gas separator and replace it with a new one.
6. Pack it in the reverse order you took it apart.
If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.
Contact Person: Wu
Tel: +8618661708013
