39437645 Air Compressor Control Valve Ingersoll Rand

39437645 Replacement Air Compressor For Ingersoll Rand

Product Description:

The working principle of the temperature control valve of the screw air compressor is that the temperature sensitive liquid expands in heat and shrinks in cold.

When the temperature of the controlled medium changes, the volume of the temperature sensing liquid in the sensor expands or contracts.When the temperature of the controlled medium is higher than the set value, the temperature-sensitive liquid expands and pushes the spool down to close the valve to reduce the flow of the heat medium.When the temperature of the controlled medium is lower than the set value, the temperature sensing liquid shrinks, and the reset spring pushes the spool to open, increasing the flow of the heat medium.

The temperature control valve controller of screw air compressor has the function of PI and PID adjustment, accurate control, multi-loop control and various functions, which can realize the control of fluid flow, pressure, differential pressure, temperature, humidity, enthalpy and air quality.

Actuators are electro-mechanical and electro-hydraulic, with manual and automatic adjustment functions, sensitive adjustment, large shutoff force, adjustable flow characteristics (linear percentage etc.).

Electro-hydraulic actuators with power off automatic reset protection function, can receive 0-10V or 4-20mA signal with valve position feedback function.The valve body is a flow control valve.

Soleniod Valve PN:

If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.

High temperature failure of Ingersoll Rand compressor is mainly caused by the following reasons:

1. Lack of oil, oil aging, for new oil.

2. The air filter is blocked.

3. Fan operation effect, bearing lack of oil, heat sink is too dirty, affect the ventilation (air cooler), water cooler to see whether the water circulation is normal.

4. Oil filter is blocked.

5. Poor performance of temperature control valve.