Qingdao Futai, Air Compressor Filter Manufacturer in China.
|Place of Origin:||CHINA|
|Brand Name:||QINGDAO FUTAI|
|Application:||Ingersoll Rand Screw Air Compressor||Item Name:||Service Kit|
|Part Number:||37951761||Machinery Test Report:||Provided|
|Product Material:||Stainless Steel/Carbon Steel||Min Design Temp:||-10°C|
|Cracking Pressure:||0.40MPA-0.45MPA||Place Of Origin:||China|
Ingersoll Rand Replacement Air Compressor Valves,
0.45MPA Air Compressor Valves
Ingersoll Rand Replacement 37951761 Air Compressor Valves
The minimum pressure valve is composed of valve body, valve core, spring, sealing ring, adjusting screw, etc. It is installed at the outlet of the oil separator. Its function is to keep the pressure in the oil separation tank from falling below 0.4MPa. The compressed air containing oil can be separated better in the separator and the loss of lubricating oil can be reduced. At the same time, it can ensure the gas pressure required to establish the oil pressure. The minimum pressure valve also functions as a one-way valve to prevent the compressed air in the system from flowing back when the system is shut down. The holding pressure of the minimum pressure valve has been adjusted before leaving the factory. If the holding pressure changes due to a long time of use, it can be adjusted by the adjustment screw on the valve.
Minimum pressure valve action:
There is a valve on the end cover of the oil separation tank. When the air pressure in the oil separation tank reaches 1.1 times the set value, this valve will automatically open to release some air and reduce the air pressure in the oil separation tank. When the screw air compressor is working at full load, gently pull the vent lever on the valve. If the valve can vent outward, it means normal.
There is a pressure gauge on the oil separation tank, which mainly detects the pre-filter pressure. The bottom of the oil separation tank is equipped with a drain valve, and the drain valve should be opened regularly to let off the water and dirt deposited on the bottom of the oil separation tank.
There is a transparent oil level mirror next to the oil separation tank to show the level of the oil separation tank. The correct oil level is when the screw air compressor is working normally, the oil level is in the middle of the upper and lower degrees. If it is too high, it will run away, and if it is too low, it will affect the performance of the whole machin
If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time
Contact Person: Wu