Qingdao Futai, Air Compressor Filter Manufacturer in China.
 |
| Place of Origin: | CHINA |
| Brand Name: | QINGDAO FUTAI |
| Certification: | ISO 9001:2015 |
| Model Number: | 23421274 |
| Minimum Order Quantity: | 1 |
|---|---|
| Packaging Details: | Carton, Wooden cases, Plastic bag, etc, make the package as your requirement. |
| Product Name: | Inlet Check Valve | Part No.: | 23421274 |
|---|---|---|---|
| Application: | Ingersoll Rand Compressor | Port Size: | Standard |
| Type: | Valve | Package: | Accordling Customer Request |
| Warranty: | 1 Year | MOQ: | 1 Pcs |
| High Light: | 23421274 Ingersoll Rand Air Compressor Spare Parts,23421274 Ingersoll Rand inlet check valve,23421274 Air Compressor Spare Parts |
||
Inlet Check Valve 23421274 Ingersoll Rand Air Compressor Valve
The air compressor inlet valve regulates the capacity of your rotary screw compressor.
The air compressor unloader valve regulates the amount of air that is sucked in by your air compressor. By opening and closing the air intake, the capacity of a rotary screw compressor is regulated.
This valve is also commonly called an inlet valve, intake valve, unloader and unload valve.
Most unloaders are of the LOAD/UNLOAD type. Which means they are either completely open (compressor loaded) or completely closed (compressor unloaded). In unloaded state, when the unloader is closed, the unit will consume about 30% of it’s nominal power.
| Brand | Product Name | Part Number |
|---|---|---|
| Atlas Copco | Inlet Valve 1st Stage | 1901003111 |
| Atlas Copco | Inlet Valve 2nd Stage | 1901004565 |
| Atlas Copco | Inlet Valve 3nd Stage | 1901010748 |
| Atlas Copco | Inlet Valve | 2901110100 |
| Atlas Copco | Inlet Valve | 2906017500 |
| Atlas Copco | Inlet Valve | 2906037600 |
| Ingersoll Rand | Kit Inlet Valve. UP-5E | 22067177 |
| Ingersoll Rand | Inlet Valve Kit | 22551972 |
| Ingersoll Rand | Inlet Valve Kit | 23152366 |
| Ingersoll Rand | Inlet Valve | 30309736 |
| Kaeser | Repair Kit Inlet Valve | 200370.0 |
| Kaeser | Repair Kit Inlet Valve | 200715.0 |
| Kaeser | Repair Kit Inlet Valve | 200716.0 |
| Kaeser | Repair Kit Inlet Valve | 200718.0 |
| Kaeser | Repair Kit Inlet Valve | 200720.0 |
| Kaeser | Repair Kit Inlet Valve | 200720.10001 |
| Kaeser | Repair Kit Inlet Valve | 200749.0 |
| Kaeser | Repair Kit Inlet Valve | 200750.0 |
| Kaeser | Repair Kit Inlet Valve | 200751.0 |
APPLICATION:
Insalld at the compressor inlet to control compressr capacity At the sat-up the vave suays open oll a contol signal is appliled to close the valve and restrict the flow. During normal operation the valve open and close in response to a control signal to meet the air demand. At the shut-down a check valve stays closed to prevent back flow through the compressor. The valve can be ordered in the non-return working system.
INSTALLATION:
At the suction flange of the air end, either directy or by flange adaptor, depending on the type of air-end. The 0N/OFF system must be connect to the signal pressure and solenoid valve.
REPLACEMENT:
The stress on valve parts depends on compressor aplcation and operating parameters. Inspect the valve and rplace, using VMC spare part kit, after 8.000 operating hours.
Contact Person: Sophia Song
Tel: +8618562870893
